If you connect a Wireless Access Point to the Macintosh computer, one to the Linux computer, and one for both Windows computers, and then set each Wireless Access Point to Access Point Client mode, you could wirelessly network each of these computers together. When the Web Configuration Utility launches, you can change the information about your wireless network. You must now configure each computer that has a 22 Mbps Wireless PCI Adapter in order to share Internet connectivity, files, and a printer. Networking by Shara Tibken Oct 22, Thank You for Submitting Your Review,!

Uploader: Tukus
Date Added: 27 August 2011
File Size: 36.77 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 94545
Price: Free* [*Free Regsitration Required]

U S Robotics USR 2216 Wireless PCI Adapter 22 Mbps

If you need to reset the Wireless Access Point at any time, perform the following steps. The SSID is case-sensitive.

Turn netwoork your computer. There is no default username or password, so just click OK when you are prompted. It is recommended that you select Disable to increase the security of your network and that you change the SSID from the default.

You will need to install this software on all the Axapter or laptops you plan to wirelessly network together. You must now configure each computer that has a 22 Mbps Wireless PCI Adapter in order to share Internet connectivity, files, and a printer.

Within the Security section, you can change the security information for the 22 Mbps Wireless Access Point. In an Infrastructure type network without an Access Point active on the default channel, clients will scan through all available channels searching for a network with a matching SSID. It is very important that you have your serial number written down before you install wifeless 22 Mbps Wireless PCI Adapter.


22 Mbps Wireless PC Card, PCI Adapter, and Access Point User Guide

You should hear a beep when the PC Card is fully inserted and detected. Remove the slot cover and insert the PCI Adapter.

Please submit your review for U. Without an IP Address, the 22 Mbps Wireless Access Point will still pass wireless network traffic between clients, but you will not be able to configure any of the settings. If you reset the Wireless Access Point, you will lose your custom settings.

If you select this, you will then need to enter a Passphrase. The 22 Mbps Wireless PCI Adapter is set to Auto Detect mode by default, which allows it to adxpter for and connect to an existing wireless network or other wireless networking products in the area.

22 Mbps Wireless Configuration Utilities

The following section describes the various functions adapte the Network Configuration Utility. This will automatically adjust the transfer speed for the best performance and longest range. The Western Digital Elements has rarely been pic cheap. Enter the e-mail address of the recipient Add your own personal message: Configure the basic connection settings Congratulations!


If you disable SSID Broadcast, the correct information must be manually entered for each wireless client that needs to be connected to your wireless network. Click Next then select Yes this computer uses the following: A window will appear showing you the files that are being loaded onto your system.

If your wireless clients are on a Microsoft network, WEP must be enabled. You have finished installing your hardware and your drivers!

Promote cracked software, or other illegal content. How to use your router’s parental controls How to use your router’s parental controls by Molly Price.


Locate an available PCI slot and remove the slot cover screw or clip. Select Disabled to turn them off. Launch a Web browser and enter that IP address. If the Configuration Utility detects an Access Point that is not enabled for Be respectful, keep it civil and stay on topic. An example of this would be if you had four computers not all using the same operating platform: