This displays the service mode screen. DC power supply PCB Refer to the chart below for settings for transmission modes. With the three level cassette feeder, in the lowest cassette feeder there is no interface connector provided between this and a lower feeder. Furthermore, the re-charge eliminator power supply bias is switched depending on the print resolution dpi equivalent and dpi equivalent.

Uploader: Nikobei
Date Added: 28 January 2017
File Size: 20.6 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 29149
Price: Free* [*Free Regsitration Required]

Changes over to the printer mode. The following block figure shows the contents of the image processing.

Attach the tray and the power cord. Regarding the Re-charge step In the transfer charging step, the transfer toner image on the paper adheres due to a positive charge from the back of the paper.

Also, this toner decomposes easily with vinyl material, therefore avoid contact. YES Check from Item 6. As mentioned before, 4 types of bias are applied to the transfer charging roller at designated times.

If paper has gp106 arrived at the registration sensor approx.

Image leading edge margin adjustment Adjustment when the leading edge of the printed image is out of alignment. However, do not expose the cartridge to direct sunlight. Always store in the storage bag. Also, for customer use, the expiration date2.

Last Drivers  ARGUS DC1500 XP DRIVER

Canon GP160

Removing the pick-up unit If the ID does not match that of the reception machine, an error code will be displayed. Is the trouble resolved when the fixFixing assem3 ing assembly is replaced? Is the trouble resolved when the paper supply sensor is replaced? Completion tone settings SW No.

YES Replace the pick-up roller. Add your own review. Pritn set label Reference: Operation outline The laser scanner motor is a 3 phase 8 pole DC brushless motor integrated, with the laser scanner motor drive circuit.

Re-charging 4 Is the re-charging prijt dirty? Refer to the chart below for settings for transmission modes. RTN signal output condition 2: One cause of document jams is the ADF is used without the filament tape being removed.

canon gp photocopier | eBay

Is there toner on the static charge 3 YES Clean the static charge eliminator? Gl160 the trouble resolved when the YES End scanner motor is replaced?


The machine should be supplied with power 24 hours a day. The construction of the main unit is also the same for units not equipped with an ADF. Is connector J on the image 3 processor PCB properly connected?

Canon 1500A003AA, H-Cartridge Toner Cartridge Black, GP 160- Original

Storage when the packing seal is intact NO Turn the cassette over and check if the lifting plate retaining roller is damaged. Printing the back-up information list It is possible to print out an information list of the data backed up by the batteries in the control memory.

Check the print pattern to make sure there are no white stripes or unevenness.

In case the machine malfunctions and cannot print, this machine is equipped with a function which allows the transfer of received image data to another fax machine for printing.